Double Glazing Seal Repairs
If the seals of double glazing windows have been damaged they can lead to damp and mould. This can damage the frame and surrounding walls and affect your health.
Fortunately, resealing is a cheaper way to repair most uPVC window frames than to replace them. A glazier can clean the frame and the glass of the window, apply a new bead, and smooth it.
Water Leaks
Window seals are made to prevent water to stay out of your home. However, when they begin to wear down, it can result in water leaks around your windows. Not only is a leaky window unpleasant but it can also cause costly structural damage to your home's structure. It is important to identify an issue early and have it repaired by an expert before it gets worse.
Often, the source of your windows that leak is not the glass but on the frame and sill. This is the most common sign of a damaged seal. It can be caused by damage to the window seal due to weather or aging, worn out caulking, or even a blocked drainage section resulting in the accumulation of water or ice.
Another sign of a damaged window seal is the appearance of water between the panes of your double glazed windows. While this isn't quite as dangerous as a leak because the water doesn't travel far enough to reach your home. However, it could suggest that the inert gas in between the panes has leaked out which will reduce the insulation value of your windows.
The final common indication of a failing window seal is condensation between the panes. This could be caused by an ineffective seal or a damp environment in your home. It could also be a problem with the glass. The condensation might not just be a nuisance, but it could cause the growth of mould and mildew in your home which can be very difficult and expensive to remove.
If you're seeing these indications, it's time to conduct an examination of your double-glazed windows. Repairs or replacements can ensure your home is protected from water leaks, lower energy costs, and even prevent drafts. It's a small expense to ensure your family's security and comfort. Contact Thompson Creek Window to discuss your options regarding a window seal replacement or repair. Our knowledgeable professionals are ready to assist! We provide assistance to homeowners throughout the Mid-Atlantic region.
Condensation
A damaged double-glazing seal could allow water to enter the space that is insulating. This can lead to condensation within the window panes, and could cause misting or fogging.
If you are noticing condensation inside your home you should contact a double glazing repair company. Condensation is an indication that the vacuum seal fabricated in the factory has failed and water is leaking into the gap between the insulated and non-insulated.
Condensation is caused by a range of causes however, the most common cause is gaskets, sealants or insulation in the uPVC frames of the windows. There are a variety of options for double glazing seal repair, but it's important that the new seals are correctly measured to ensure a perfect seal and a tight fit.
Gaskets are generally made of polyurethane, which is a material that can be used to seal gaps between double-glazed units. They are designed to last a long time, but can deteriorate in time as a result of wear and tear or exposure to changes in temperatures and weather conditions.
As double glazing repairs Corby , the foam may shrink or crack over time. This can cause cracks in your seal and allow moisture to get into the double-glazed window. This not only creates condensation, but can also result in a loss of energy efficiency, which means that you're losing heat from your home to outside air.
One solution to the issue is to seal the windows. But, this isn't guaranteed to fix the issue as it may only remove the condensation that has formed and won't address the underlying issues that are causing your double-glazed windows to leak or to form condensation.
Another option is to have your windows replaced completely. This should be done by a professional that offers an insurance-backed guarantee. If the company fails, you're still covered by insurance. It's important to note that the warranty on your replacement windows should be a minimum of 10 years.
Misting
As autumn draws nearer, it's a good idea to check that your double glazing seals are in good condition. Window seals that are damaged or worn out do are not just detrimental to the insulation properties of your windows, but could also cause condensation, mold, and damp. To prevent further damage to your double-glazed windows and to reduce energy costs, it's important to repair any problems as soon as you can.
A standard double glazed window is constructed from two glass panes joined by an internal space that's filled with gas. A sealant layer on the outside covers the gap between the uPVC frame and the glass. This is crucial to ensure the air-tight sealing that keeps cool and warm air in your home separate, saving money on your heating bills. These seals can become damaged over time because of weather conditions, ageing or improper installation. Once this happens, the magic insulation formula that makes your double-glazed windows so effective could begin to degrade.
If not checked or unchecked, damaged or defective seals could lead to damp and condensation which will not only ruin the appearance of your windows, but could also affect your health. Damp and mould not only causes damage to your floors, walls and ceilings but can also cause allergens and irritants in your home that can cause harm to you and your family's health.
The most common problem with double glazing is the misting that occurs between the panes. This occurs when moisture gets into the insulated part of your window. This can be quite difficult to resolve without expert help with repair of your seal.
There are DIY methods of tackling this issue, but we'd advise against it as it's not only risky but also very hazardous and destructive to your windows. These methods involve drilling holes in the glass units and applying chemicals to get rid of the fog and condensation. This could lead to a number of complications including exposing your windows to water damage which can ruin the unit altogether.
Professional glaziers have the tools and skills to safely seal uPVC frames. They can also offer you long-lasting results. Not to mention they can also give advice on the best ways to keep your windows in good condition to prevent any future problems.
Draughts
A draft coming from your window is a sign that the sealant has probably failed and must be replaced or repaired. This will block cold air from getting into your home. It will also increase the efficiency of your energy, reduce heating bills, and increase the comfort.
It is also important to remember that not all draughts come from window seals but from the gap between the frame and bricks. In certain cases, it could be possible to fix this by caulking the gap. If this does not work, you will need to have the seal professionally repaired.
When the sealant around double-glazed windows starts to breakdown, it allows water ingress. This can result in dampness or even mold. This could affect health and cause damage to the property. If you notice any problems with water intrusion and you want to deal with them as soon as you can. If your windows are still covered by a warranty, it's worth checking to find out if the company that sold them will cover the cost.
The windows themselves are typically covered by a warranty which can be at least 10 years however some businesses offer lifetime warranties - so it is worth checking this information out. If your double glazing is under warranty, you must contact the company who sold them as quickly as you can and inform them about any issues you're experiencing. It is recommended to contact the company in person or by email and letter. This will ensure that everything is documented and clear.
It is also worth noting that draughts can be often caused by faulty hinges, not the lack of seals that are effective. The hinges are responsible for closing the window sash (the section that you open) but they can become stiffer as time passes if they're not regularly oiled. This can create a gap between the sash and the frame which could allow cold air in. Replacing these hinges will solve this issue without affecting window seals.